MODEL NO: 1-18 External

Tankpak Series 2, 1-18 External



Rheem Tankpak Series 2 is the next phase in commercial water heating, combining the benefits of mains pressure and continuous flow water heating.

Rheem Tankpak Series 2 is supplied with the controller, pump, in line filter and water heater power supply factory assembled, requiring only connection of the storage tank on site.

  • 84% thermal efficiency 6 Star heat source
  • Vitreous enamel storage tank up to 82°C operation
  • Large flow 50mm storage tank fittings
  • Digital temperature display
  • Fully hot dip galvanised frame with Tankpak 2-18

Warranty Conditions, 5 years warranty on cylinder and heat exchanger, 1 year on parts and labour. 12 months warranty on Heat Exchanger when used with a thermostat setting exceeding 75°C

To obtain a quote on this product

Call Rheem on

Ready to buy a Rheem?

For help to make the right choice, access our network of Rheem Approved Plumbers and Stockists.

The water heater(s) shall be Rheem Tankpak Series 2 model no. __ with an hourly input of __ MJ and a hourly recovery rate of ___ litres through 50°C rise. The water heater(s) shall conform to AS4552. The water heater shall operate on the top down heating principle. The water heaters shall be factory assembled and tested and include thermostatic control, double redundancy timers and double redundancy pump relays housed in an IP44 enclosure. Deluxe models shall incorporate general purpose outlets for continuous flow water heater power housed in a water proof enclosure, and cold water inlet line strainer. The frame shall be hot dip galvanised and third party certified for wind loadings up to 74.87m/sec. Models shall be suitable for wall, floor or back to back mounting, model dependent. Storage tanks shall be Rheem model no. 610340 with a storage capacity of 325 litres or 610430 with a storage capacity of 410 litres with heavy duty enamelling and 25mm sacrificial anode and shall be fitted with 50mm BSP connections. 74.87m/sec based on a Type 2 structure, 25 year design life, 1/250 ARI, Region C only.

Units in Parallel

Temperature Rise

Please, select all the fields

Hourly Thermal Input Recovery
1st Hour Capacity x610340 1st Hour Capacity x610430

Tankpak Continuous Flow - Commercial brochure Oct 2015

Case Studies

Before you get started, have a look at what Rheem can do for your project by seeing what we’ve done previously.

Sizing and estimating made easy

To plan your hot water solution, use our handy step-by-step guides.

On-call technical advice

To help you pinpoint the right hot water solution, and to solve technical issues, please give us a call. Our technical advisors are among the best in the business, and we provide free technical advice for all types of commercial, industrial and residential hot water systems.

Call 1300 556 036

Ready to buy a Rheem?

For help to make the right choice, access our network of Rheem Approved Plumbers and Stockists.