MODEL NO: 9540150S

Rheem Commercial Water to Water Heat Pump – 15kW Stackable Model

2

YEAR
WTY

Rheem's Commercial Water to Water (W2W) heat pump includes units using R134a for hot water heating up to 65°C, with a minimum entering water temperature on the building loop of 12°C, giving a return water temperature of 7°C, with the units being compact and suitable for indoor or external installation. Stackable models allow units to be stacked two high for reduced footprint.

• Excellent return on investment for magnified savings on operating cost.

• Delivers domestic hot water up to 65°C as well as reduces building chilling load with combined Coefficient of Performance (COP) of up to 7.

• Adds to the green points from end-of-trip facilities.

• Reduced footprint with available stackable models.

• Supplied with built-in Rheem iQ controller with optional BMS capability.

• WaterMark Certified.

• 2-year warranty on parts and labour on sealed systems*

• 1-year warranty on parts and labour on remainder*

*Warranty conditions apply

To obtain a quote on this product

Call Rheem on


Ready to buy a Rheem?

For help to make the right choice, access our network of Rheem Approved Plumbers and Stockists.


The water heater shall be Rheem commercial heat pump model 9540150S with a nominal heating output of 15 kW and cooling output of 10 kW with a combined C.O.P of 7.0 at 12oC in/7oC out chilled water temperature. The water heater shall have a delivery temperature of up to 65°C and be capable of connecting with building return circulation loop. The refrigerant shall be R134a. The water heater shall conform to Australian Standard 3498 and be WaterMark certified. The water heater shall be factory assembled and tested. The water heater shall be manufactured with marine grade aluminium casing. The water heater shall have outputs for connection to a BMS system and have auxiliary boost control function. The water heater shall incorporate tank temperature sensor, building flow temperature sensor as well as the following sensors for hot side water inlet & outlet temperature and chilled side water inlet & outlet temperature and discharge refrigerant temperature, suction and discharge refrigerant pressure transducers, cold water flow switch and low temperature cut out switch.

Units in Parallel

Evaporator Entering Temperature

Required Temperature Rise

All the fields are required
Output Recovery

Rheem_HeatPumpRevision_V1 190808

Rheem_HeatPumpRevision_V1 190808



Case Studies

Before you get started, have a look at what Rheem can do for your project by seeing what we’ve done previously.


Sizing and estimating made easy

To plan your hot water solution, use our handy step-by-step guides.


On-call technical advice

To help you pinpoint the right hot water solution, and to solve technical issues, please give us a call. Our technical advisors are among the best in the business, and we provide free technical advice for all types of commercial, industrial and residential hot water systems.

Call 1300 556 036

Ready to buy a Rheem?

For help to make the right choice, access our network of Rheem Approved Plumbers and Stockists.