MODEL NO: 4A1250, 4A2250

Rheem Stellar® 250L Stainless Steel Electric Water Heater

12

YEAR
WTY

The perfect electric water heater for small to medium-sized families with a big demand for hot water.

Rheem Stellar® Stainless Steel water heaters are not recommended for installation in some areas. To find out if Stellar Stainless Steel is suitable for your home [download this Stainless Steel Suitability Map.]

Features at a Glance

Capacity (L)
270
No. of People
3-5  continuous
Energy Rating
n/a

To install a Rheem, you'll need a plumber

Get in touch with your local Rheem Approved Plumber and ensure your install is done right.

  • Features dual handed cold water connections, a hot water connection at the top of the water heater.
  • Stainless steel cylinder and water fittings
  • No anode — saves on maintenance and service costs
  • Mains pressure — so you can run the tap and the dishwasher at the same time.
  • Money saving — designed for off-peak energy rates.
  • Twin element model (4A2250)
  • Made in Australia
  • 12 year cylinder warranty* Rheem Stellar Stainless Steel water heaters are not recommended for installation in some areas. Refer to the Stainless Steel Suitability Map for your state in the Downloads tab below to see if Stainless Steel is suitable for your home.
  • 12 years cylinder warranty*
  • 3 years labour on cylinder*
  • 1 year parts and labour warranty*

*Warranty conditions apply.

To obtain a quote on this product

Call Rheem on


Ready to buy a Rheem?

For help to make the right choice, access our network of Rheem Approved Plumbers and Stockists.


Top Five Troubleshooting Topics


The error code is displayed in the room temperature display. Please refer to the below listing to see what your error codes means, then call Rheem Service to book a service call on 13 10 31.

 

Error Code

Fault Condition

Action

03

Filter damage

 

 

 

 

 

 

BOOK SERVICE CALL WITH RHEEM SERVICE

PH: 13 10 31

05

Filter not cleared

11

Ignition Failure

12

Flame Failure

14

Thermo Switch Off (150⁰C)

Overheat Thermistor temp. too high

16

Room temp. too high

(40⁰C  10 min)

22

Tip-Over switch operate

31

Room temp. thermistor abnormal

33

Overheat thermistor abnormal

62

Abnormal fan speed

71

Gas solenoid valves circuit abnormal

Gas proportional control valve circuit abnormal

72

Detected false flame

Thermocouple circuit abnormal

73

Functional trouble on gas type circuit

 

 

H: High

L: Low

SW: Switch

Please only conduct the basic maintenance specified for owners in your Owner’s Guide. All other maintenance must be made by an approved plumber. To find your local Rheem Plumber, contact us or call Rheem on 1300 556 036.  

No. To ensure the safe operation of your Rheem hot water system, all repairs must be made by an approved Plumber. To find your local Rheem Plumber, contact us or call Rheem on 1300 556 036.

Please locate your model number, serial number and the date of manufacture, found here, for your Rheem hot water system and call Rheem on 1300 556 036.

Your local Rheem Plumber will pinpoint your ideal hot water system. They can supply Rheem products for a very competitive price and install them for you too. Another way to find the right hot water system for your home is to use our handy Help Me Decide tool


Is the gas connection only used for the Water Heater?

Please, select all the fields

Running Cost Estimator Disclaimer as at 23/10/2017

Things that you should know about the Rheem Running Cost Estimator

The estimator is provided as a guide only to help you compare estimated running costs between various water heater types.

The estimator is based on Australian Standard AS5263, which relies on certain assumptions, such as an average daily load of 200L and 19 tap turns. Your situation and usage may be different to these assumptions, so the estimator may not match your actual daily loads and pattern of use.

Accordingly, the estimator cannot and does not purport to provide an accurate assessment of your yearly hot water energy bill. It does, however, allow a reasonable comparison between various water heater types based on Australian Standard AS5263 and average fuel tariffs used in the estimator.

Your state has been used to determine the temperature rise required to heat water from cold to a temperature of 65C, the applicable charge for the tariff type selected and the amount of solar savings.

Solar savings are based on Australian Government approved modelling for the type of solar water heater selected and the booster type. All electric boosted solar water heaters are modelled with a continuous tariff, but may be suitable for use on other tariff types depending on the model selected, your climate zone and the amount and usage pattern of hot water use.

Tariffs are current as at 1st July 2017 and represent an average price for the fuel type for the capital city in the state or territory, including GST.

Fixed charges, system access charges, delivery fees and any other fees and charges, including special rates and discounts are excluded from the estimator.

Energy consumption figures used are for a typical water heater within a category and do not reflect a specific model. Actual energy use may vary.

Heat Pump and solar water heaters may be suitable for Off Peak/Shoulder Rate tariffs depending on the type of water heater selected and the location. You should consult with your energy provider or installer before making any decision.

Rheem MKT Spec Sheet Electric SS Stellar May 2018


Rheem Stellar® 50L Stainless Steel Electric Water Heater

Inexpensive to own and economical to run.

Save when switching to solar


To install a Rheem, you'll need a plumber

Get in touch with your local Rheem Approved Plumber and ensure your install is done right.


Ready to buy a Rheem?

For help to make the right choice, access our network of Rheem Approved Plumbers and Stockists.