MODEL NO: 876627, 874627

Rheem 27L Gas Continuous Flow Water Heater

10

YEAR
WTY

Rheem 27L is our highest capacity continuous flow gas water heater. With 27L/minute capacity it can deliver that little bit of extra hot water when you need it. It's perfect for large families with limited space, but big demands for hot water.

Features at a Glance

Capacity (L)
27
No. of People
4-6
Energy Rating
6

To install a Rheem, you'll need a plumber

Get in touch with your local Rheem Approved Plumber and ensure your install is done right.

  • 27 L/minute continuous hot water delivery (at 25°C rise) - suitable to 3 bathrooms
  • Flamesafe® overheat protection — shuts down the water heater before overheating can occur
  • Rheem Q Factor™ — ensures rapid hot water every time, with none of the fluctuations that occur with some continuous flow units
  • Remote temperature controller options — so you can set the best and safest temperature for the bathroom and kitchen
  • Extra safety — 50°C temperature limited models available
  • 60° C hot water for kitchen and laundry - where 50 or 55° C is often not hot enough (Model: 874627)
  • Natural gas and propane models available
  • 10 year warranty on heat exchanger*
  • 10 year parts & 3 year labour on heat exchanger.*
  • 3 year parts & labour warranty on all other components, for domestic (non-commercial) installations only.* See the Rheem warranty set out in the Owner's Guide and Installations Instructions

To obtain a quote on this product

Call Rheem on


Ready to buy a Rheem?

For help to make the right choice, access our network of Rheem Approved Plumbers and Stockists.


Top Five Troubleshooting Topics


Your local Rheem Plumber will pinpoint your ideal hot water system. They can supply Rheem products for a very competitive price and install them for you too. Another way to find the right hot water system for your home is to use our handy Help Me Decide tool

The flow of hot water is not adequate to keep the water heater operating. This can be caused by flow restrictors and water saving low flow taps. You’ll need to have a plumber increase your hot water flow rate to a minimum of two to three litres per minute. To find your local Rheem Approved Plumber, contact us  or call Rheem Service on 1300 556 036.  

Check out our Troubleshooting Guide for answers to some of the most common troubleshooting questions.

Lowering the temperatures of your stored hot water will result in a greater level of hot water consumption. Therefore, it is unlikely to significantly reduce your gas or electricity consumption. Also, in order to meet the requirements of the Plumbing Code and for showers to operate correctly, it’s necessary to store your hot water at a minimum of 60օC.

Please see the Owner Guide for your heater model.


Is the gas connection only used for the Water Heater?

Please, select all the fields

Running Cost Estimator Disclaimer as at 23/10/2017

Things that you should know about the Rheem Running Cost Estimator

The estimator is provided as a guide only to help you compare estimated running costs between various water heater types.

The estimator is based on Australian Standard AS5263, which relies on certain assumptions, such as an average daily load of 200L and 19 tap turns. Your situation and usage may be different to these assumptions, so the estimator may not match your actual daily loads and pattern of use.

Accordingly, the estimator cannot and does not purport to provide an accurate assessment of your yearly hot water energy bill. It does, however, allow a reasonable comparison between various water heater types based on Australian Standard AS5263 and average fuel tariffs used in the estimator.

Your state has been used to determine the temperature rise required to heat water from cold to a temperature of 65C, the applicable charge for the tariff type selected and the amount of solar savings.

Solar savings are based on Australian Government approved modelling for the type of solar water heater selected and the booster type. All electric boosted solar water heaters are modelled with a continuous tariff, but may be suitable for use on other tariff types depending on the model selected, your climate zone and the amount and usage pattern of hot water use.

Tariffs are current as at 1st July 2017 and represent an average price for the fuel type for the capital city in the state or territory, including GST.

Fixed charges, system access charges, delivery fees and any other fees and charges, including special rates and discounts are excluded from the estimator.

Energy consumption figures used are for a typical water heater within a category and do not reflect a specific model. Actual energy use may vary.

Heat Pump and solar water heaters may be suitable for Off Peak/Shoulder Rate tariffs depending on the type of water heater selected and the location. You should consult with your energy provider or installer before making any decision.

Continuous Flow Brochure 2018


Rheem 12L Gas Continuous Flow Water Heater

Compact and energy efficient with a minimum 6 star energy rating.

Rheem Metro 26L Gas Continuous Flow Water Heater

Rheem Metro 26L Gas Continuous Flow Builder models are the right choice for your projects.

Save when switching to solar


To install a Rheem, you'll need a plumber

Get in touch with your local Rheem Approved Plumber and ensure your install is done right.


Ready to buy a Rheem?

For help to make the right choice, access our network of Rheem Approved Plumbers and Stockists.