Rheem Tankpak Series 2 is the next phase in commercial water heating, combining the benefits of mains pressure and continuous flow water heating. Rheem Tankpak models with 1xCFWH are supplied with the tank, controller, pump, mounting bracket and water heater power supply.
Features at a Glance
- 84% thermal efficiency 6 Star heat source
- Vitreous enamel storage tank up to 82°C operation
- Large flow 50mm storage tank fittings
- Digital temperature display
Owners and Installation Guides
The water heater(s) shall be Rheem Tankpak Series 2 model no. __ with an hourly input of __ MJ and a hourly recovery rate of ___ litres through 50°C rise. The water heater(s) shall conform to AS4552. The water heater shall operate on the top down heating principle. The water heaters shall be factory assembled and tested and include thermostatic control, double redundancy timers and double redundancy pump relays housed in an IP44 enclosure. Deluxe models shall incorporate general purpose outlets for continuous flow water heater power housed in a water proof enclosure, and cold water inlet line strainer. The frame shall be hot dip galvanised and third party certified for wind loadings up to 74.87m/sec. Models shall be suitable for wall, floor or back to back mounting, model dependent. Storage tanks shall be Rheem model no. 610340 with a storage capacity of 325 litres or 610430 with a storage capacity of 410 litres with heavy duty enamelling and 25mm sacrificial anode and shall be fitted with 50mm BSP connections.
Number of Units
Please, select all the fields
|Hourly Thermal Input||Recovery|
|1st Hour Capacity x610340||1st Hour Capacity x610430|