Rheem Tankpak Series 4 is the latest generation in commercial gas water heating with electronic staging and rotation, for increased efficiency and product life. Combining the benefits of mains pressure and continuous flow water heating, Rheem Tankpak Series 4 Deluxe models are supplied with the master controller, optional duty/standby primary pumps, optional duty/standby secondary pumps customised for each site requirement, in line filter, BMS and remote monitoring capabilities, new 24/7 email and SMS alarm notification capability and multiple sensors with digital display for total system diagnostics. Models with up to 4 heaters are supplied with 10A plug and lead. Models with 5 or 6 heaters require hard wiring by qualified person on site.
Features at a Glance
Capacity
Warranty*
Features
- New 28L Commercial continuous flow gas water heaters.
- New flexible connection options.
- Electronic staging and rotation with intelligent Deluxe controller.
- BMS and remote monitoring capabilities.
- 24/7 Email and SMS alarm notification capability.
- Duty/standby primary and/or secondary pumps options.
- System diagnostics with multiple sensors.
- Structural certification for lifting and B2-zone wind rating.
- Inline floor mounting configuration with up to 6 heater.
- Reduced site installation costs.
- Factory assembled and tested.
- 84% thermal efficiency 6 Star heat source
- Stainless Steel or Vitreous enamel storage tank with 50mm fittings up to 82°C operation
Warranty Conditions
Up to 8 years warranty on cylinder, 5 years warranty on heat exchanger and 3 year warranty on parts and labour.
12 months warranty on all parts and labour when used with a thermostat setting exceeding 76°C.
For full terms and conditions please contact Rheem or visit www.rheem.com.au/rheem/help/warranties.
Brochures
Owners and Installation Guides
The water heater(s) shall be Rheem Tankpak Series 4 Deluxe model no. __ with an hourly input of __ MJ and an hourly recovery rate of ___ litres through 50°C rise. The water heater(s) shall conform to AS/NZS5263.1.2. The water heater shall operate on the top down heating principle. The water heater shall have electronic staging and rotation for models with more than two continuous flow units to reduce energy consumption. The water heater shall have high level BMS and remote monitoring capabilities. [for duty/standby primary pump option] The water heater shall be provided with two primary pumps operating in duty/standby and auto changeover if pump is in fault. [for duty/standby secondary pump option] The water heater shall be provided with factory integrated duty/standby UPM series secondary pumps with auto changeover if pump is in fault. The water heater shall be supplied with 3 temperature sensors to monitor tank, building flow and building return and if secondary pumps are integrated, control the pumps via the return sensor to reduce energy consumption. The water heaters shall be factory assembled and tested and include master controller with digital display housed in an IP54 enclosure. The frame shall be hot dip galvanised and third party certified for wind loadings up to 74.87m/sec. Models shall be suitable for wall, floor or back to back mounting, model dependent. Indoor models shall be supplied with factory integrated condensate drains and traps. Storage tanks shall be Rheem model no. 61034050 with a storage capacity of 325 litres or 61043050 with a storage capacity of 410 litres with heavy duty enamelling and 25mm sacrificial anode and shall be fitted with 50mm BSP connections.
Number of Units
Temperature Rise
