text.skipToContent text.skipToNavigation
install a
Rheem

MODEL NO: 866627
Rheem 27L Internal Gas Continuous Flow Water Heater : 50°C
Hot water that never runs out. Rheem 27L internal is our highest capacity gas continuous flow gas water heater. With 27L/minute capacity it can deliver that little bit of extra hot water when you need it. It's perfect for large families with limited space, but big demands for hot water

Features at a Glance

Capacity
27
No. of People
6
Energy Rating
6
Warranty*
10 years
Features:
  • 27L/minute continuous hot water delivery (at 25°C rise) – suitable for 3 bathrooms
  • Money saving — 6 Star energy efficiency means you can save on gas bills.
  • Extra safety — temperature limited 50°C model
  • Remote temperature controller options — so you can set the best and safest temperature for different taps around the home.
  • Must be installed with certified and matched Rheem flue system
Warranty:
  • 10 year parts & 3 year labour on heat exchanger.*
  • 3 year parts & labour warranty on all other components, for domestic (non-commercial) installations only.
*Warranty conditions apply

Specifications

Running Cost Estimator

Running Cost Estimator Disclaimer as at 01/10/2023

Things that you should know about the Rheem Running Cost Estimator

The estimator is provided as a guide only to help you compare estimated running costs between various water heater types.

The estimator is based on Australian Standard AS5263, which relies on certain assumptions, such as an average daily load of 200L and 19 tap turns. Your situation and usage may be different to these assumptions, so the estimator may not match your actual daily loads and pattern of use.

Accordingly, the estimator cannot and does not purport to provide an accurate assessment of your yearly hot water energy bill. It does, however, allow a reasonable comparison between various water heater types based on Australian Standard AS5263 and average fuel tariffs used in the estimator.

Your state has been used to determine the temperature rise required to heat water from cold to a temperature of 65C, the applicable charge for the tariff type selected and the amount of solar savings.

Solar savings are based on Australian Government approved modelling for the type of solar water heater selected and the booster type. All electric boosted solar water heaters are modelled with a continuous tariff, but may be suitable for use on other tariff types depending on the model selected, your climate zone and the amount and usage pattern of hot water use.

Tariffs are current as at 9th March 2023 and represent an average price for the fuel type for the capital city in the state or territory, including GST.

Fixed charges, system access charges, delivery fees and any other fees and charges, including special rates and discounts are excluded from the estimator.

Energy consumption figures used are for a typical water heater within a category and do not reflect a specific model. Actual energy use may vary.

Heat Pump and solar water heaters may be suitable for Off Peak/Shoulder Rate tariffs depending on the type of water heater selected and the location. You should consult with your energy provider or installer before making any decision.