If your home is in a temperate or tropical location which is not subject to frost and you have good water chemistry, then the Rheem 52L Series system is ideal. The 52L Series system directly heats the water as it passes through the collectors and then rises back into the storage tank. This process continues whilst the sun is shining giving you and your family ample hot water
The 52L series is only available through the Rheem Solar Specialist network.
Features at a Glance
No. of People
Suitable for temperate and tropical locations.
- Available in in 4 COLORBOND® colours
Gas or electric boost options - for days when the sun doesn't shine.
300L tank capacity is suitable for 2-5 people.
Available with 2 x NPT200 or 2 x L or 2 x CSA2007 collectors – to “collect” energy from the sun.
- 7 year cylinder and collector supply*
- 3 year cylinder and collector labour*
- 1 year parts supply and labour*
System with L or CSA2007 collectors
10 year cylinder and collector supply*
5 years cylinder and collector labour*
5 year parts supply and labour.*
Owners and Installation Guides
Running Cost Estimator
Select your State
Select a Tariff
Is the gas connection only used for the Water Heater?
Running Cost Estimator Disclaimer as at 14/07/2021
Things that you should know about the Rheem Running Cost Estimator
The estimator is provided as a guide only to help you compare estimated running costs between various water heater types.
The estimator is based on Australian Standard AS5263, which relies on certain assumptions, such as an average daily load of 200L and 19 tap turns. Your situation and usage may be different to these assumptions, so the estimator may not match your actual daily loads and pattern of use.
Accordingly, the estimator cannot and does not purport to provide an accurate assessment of your yearly hot water energy bill. It does, however, allow a reasonable comparison between various water heater types based on Australian Standard AS5263 and average fuel tariffs used in the estimator.
Your state has been used to determine the temperature rise required to heat water from cold to a temperature of 65C, the applicable charge for the tariff type selected and the amount of solar savings.
Solar savings are based on Australian Government approved modelling for the type of solar water heater selected and the booster type. All electric boosted solar water heaters are modelled with a continuous tariff, but may be suitable for use on other tariff types depending on the model selected, your climate zone and the amount and usage pattern of hot water use.
Tariffs are current as at 1st July 2021 and represent an average price for the fuel type for the capital city in the state or territory, including GST.
Fixed charges, system access charges, delivery fees and any other fees and charges, including special rates and discounts are excluded from the estimator.
Energy consumption figures used are for a typical water heater within a category and do not reflect a specific model. Actual energy use may vary.
Heat Pump and solar water heaters may be suitable for Off Peak/Shoulder Rate tariffs depending on the type of water heater selected and the location. You should consult with your energy provider or installer before making any decision.